VERSION 2026.1.3.5
2026-11-10
FIXES
-
Fixed an error in the calculation of forward overlap that was present in the last two versions and became noticeable in extreme terrain. Affected projects can be recalculated using the “Recalculate” function.
-
Project migration: Access violation when layers are missing from the project.
VERSION 2026.1.3.3
2026-09-29
FIXES
-
Fixed display issues when storing web map tiles localy in a database.
-
Migrate Form: Fixed issue where subsequent combo boxes were not initialized automatically.
-
Fixed an abstract error when opening another project.
-
Fixed issue where the AOI remained selected after switching projects.
-
Fixed an access violation in the log panel when licensing fails.
-
Fixed an issue where the terrain intersection function did not work under certain circumstances.
-
A problem has been fixed where all values were set to 0.0 when importing an INI file from RiParameter.
-
Showing FOV [deg] for pushbroom configurations.
VERSION 2026.1.2.2
2026-07-20
NEW FEATURES
-
Missions - Footprint Export: Exported shapes now include additional information about the event.
-
TrackAir Export: Added flight line mode (without image positions).
FIXES
-
Fixed the geocoder in the New Project dialog.
-
Imported DEMs are now saved as TIFF files to ensure compatibility with NAVIGATOR.
-
Excel Export: Fixed incorrect point density values when the maximum range is reached.
-
Removed the warning message (log entry) that was generated when attempting to download an SRTM tile containing only water.
-
TrackAir import: Fixed issues when the start and end points were located in different UTM zones.
MAINTENANCE
-
Updated third-party dependencies.
VERSION 2026.1.1.2
2026-05-05
NEW FEATURES
-
Introduced new functions to split and merge AOIs.
-
The New Project dialog now has a simplified interface for setting the project location.
-
Some planning parameters are now stored in the project file (height rounding, rounding direction, fixed azimuth).
-
Added simple GCP export.
-
TrackAir export for flight lines without image positions is now supported through the creation of pseudo images.
FIXES
-
Fixed mismatch between Excel export values and user-defined forward and side overlap settings.
-
Fixed styling issues in KML exports.
-
Fixed issue where drawing a WGS84 grid only worked in the Northern Hemisphere.
-
Fixed access violation after deleting images (queries-tab).
-
Fixed issue where the log folder was not migrated when importing INI files from a previous installation.
-
Fixed issue where renaming a mission did not update the mission selection dropdown.
-
Fixed errors on systems using a comma as the decimal separator (artifacts in progress charts and failed sun angle calculations).
-
Fixed issue where the function to merge flight lines did not behave correctly.
-
Fixed missing “Altitude” option for image positions in the text file export.
-
Fixed error in the KML export when geometry types do not match.
VERSION 2026.1.0.0
2026-02-13
ATTENTION
-
To run this version, the license must be updated to include the 2026 feature. Please contact your sales representative.
NEW FEATURES
-
New "Missions" section in the main navigation.
-
Large projects can now be divided into manageable missions.
-
Streamlined workflow for creating, updating, and deleting missions.
-
Track project progress and history using different map views.
-
Manually update the status of flight lines.
-
Analyze flight quality using charts and histograms.
-
Create quality controls after the flight using the actual IMU/GNSS data.
-
Visualize deviations using vector representations.
-
Create flight reports directly within MISSIONPLANNER.
-
Direct license updates via the TOPOFLIGHT License Server.
-
Save configurations for TXT exports.
-
TXT and Excel exports can now include flight and progress information.
-
Quality Controls: Option to choose between 1/e and 1/e² for laser beam footprint size.
-
New function to change the direction of flight lines so that all lines face the same direction.
-
KML configurations now also include layer selection.
FIXES
-
The Visual Studio C++ Runtime dependency is now included in the setup.
-
Fixed issue where flight line labels could not be updated.
-
Sun Chart now includes input values when exporting to the clipboard.
-
Fixed issue where the wrong parameter was read from the RiParameter.ini file (maxRangeUsed instead of maxRangeAvailable).
-
Minor improvements to the Labyrinth export.
VERSION 2024.1.3.0
2025-10-17
NEW FEATURES
-
Specify a color for terrain elevations below or equal to sea level.
-
Edit Flight Lines now allows moving line(s) perpendicularly by a specified distance.
-
When creating parallel lines, you can now choose between optimized and fixed spacing.
-
When using fixed spacing between flight lines, an option is available to fill the AOI with the minimum number of flight lines.
-
At project startup, layer paths are now validated. A message is displayed if any layers are missing.
-
Updated Labyrinth export (added more statistical properties, improved labels, and reduced number of digits).
-
Added SoftNav protocol to the available export formats.
FIXES
-
Fixed terrain appearing in the wrong location when using a custom TIFF.
-
Fixed issue where an image appeared too close to the end of a flight line.
-
Quality controls are now calculated correctly below sea level.
-
Fixed a gap in the default classes for beam footprint.
-
Fixed access violation when creating LiDAR QC for a secondary sensor.
-
Fixed false distance estimation that resulted in negative GSD and HAGL values in the Excel export.
-
Updated SQLite3 driver.
-
Fixed missing terrain intersections when the custom terrain uses a different map unit (e.g., feet).
-
Corrected MTA zone labels.
VERSION 2024.1.2.1
2025-07-24
NEW FEATURES
-
Export: New Labyrinth export (as JSON).
-
QC: Point density quality control will show no result when the terrain is out of laser range.
FIXES
-
Settings from previous versions are now migrated when installing the software.
-
Settings: Fixed issue where the SRTM button incorrectly set the Copernicus download folder.
-
LiDAR configurations: Fixed issues on systems using a comma (",") as the decimal separator.
-
Export: Fixed KML styling issues.
-
Forward overlap: Ensures that forward overlap requirements are met even after reaching the maximum number of iterations.
-
Side overlap: When creating parallel lines, the minimum and mean criteria are now checked in both directions.
-
QC Classification: Right-click now deselects the entry. The former limitation to 8 classes has been removed.
-
Edit Flight Lines: Fixed issue with helper lines being too short when extending flight lines with a fixed azimuth.
VERSION 2024.1.1.1
2025-04-15
NEW FEATURES
-
Retrieve Copernicus elevation data with one click (arrow next to SRTM).
-
Added EGM2008 to the list of supported vertical datums.
-
Merge segments of the same flight line.
-
Elevate a segment of a flight line to its own independent flight line.
-
CTRL + and CTRL - now update the map zoom.
-
Export for Wehrli+Associates sensors.
-
Export for AeMission
-
Export valid sun angle time windows to CSV.
-
Enable/disable forward overlap in the basic settings when not in use.
-
Removed the Terrain-Image and the real terrain display.
-
Export vector layers to png, jpg or tif.
FIXES
-
Unable to use terrain models with a spatial reference in WGS84.
-
Access violation on German-language systems when querying sun elevation.
-
Trial licenses: When creating parallel lines, the original flight line incorrectly gets an altitude of 0 ft.
-
Terrain-following flight mode: The endpoint of the flight line is not exactly where clicked.
-
Flight line footprints: Slight shift (<30m) away from the flight line for very long flight lines.
-
Error when the sidelap minimum criterion is equal to the mean criterion.
-
Parallel lines do not fill the entire AOI when gaps are present.
-
KML export: Incorrect coordinates when the CRS is not properly set for project layers.
-
KML export: Invalid file when exporting with the wrong decimal separator.
-
Sun elevation: Incorrect times on the second time window.
-
Pushbroom sensors: Incorrect swath width calculation.
-
Updated Web URL for OpenFlightMap basemap.
-
GCP: Stuck in edit mode when changing between edit mode and delete mode.
VERSION 2024.0.2.2
2024-12-16
NEW FEATURES
-
New version dialog: Displays a message if the newer version is not compatible with the license.
-
Geometry dialog: The right-click menu for elements now shows the azimuth for linear objects.
-
Excel export: Added new keywords "_DistanceToNext" and "_DistanceToPrevious" to calculate distances between flight lines.
FIXES
-
Unable to draw flight lines after editing a flight line with a fixed azimuth.
-
Quality controls: Black classes when using a comma as the decimal separator.
-
Export to TrackAir: Fixed an access violation when exporting a flight plan for a LiDAR system.
-
Text export: Modified the appearance of sub-items to indicate when they are clickable.
-
TrackAir import dialog: Rearranged UI elements to improve responsiveness.
VERSION 2024.0.2.1
2024-11-05
FIXES
-
QC: Wrong statistical values in classification of grid-layer.
-
UI: Issues with screen zoom on the flight lines tab.
-
UX: When drawing new geometries, sometimes no vertices were added.
-
Sensors: Increased display of digits for FPS and Px size.
-
QC: Empty sidelap-map in special occasions.
-
3D-view: Flight lines and image positions as 3D geometries as default.